127.0.0.1 UPS Status

Sun Aug 24 15:06:24 MYT 2008

Monitoring: tux
 UPS Model: MATRIX 3000
  UPS Name: Matrix3000
   APCUPSD: Version 3.14.4
    Status: ONLINE

Last UPS Self Test: NO
Last Test Date: Not found

Utility Voltage: 246.8 VAC
   Line Minimum: 246.8 VAC
   Line Maximum: 248.7 VAC
    Output Freq: 50.0 Hz

       UPS Temp: 31.9

Recent Events

Sun Aug 24 10:57:32 MYT 2008  apcupsd error shutdown completed
Sun Aug 24 10:57:32 MYT 2008  Valid lock file for pid=28990, but not ours pid=30663
  please stop it and run this program again.
  If apcupsd or apctest is already running,
Unable to create UPS lock file.
Sun Aug 24 10:57:32 MYT 2008  apcupsd FATAL ERROR in device.c at line 70
Sun Aug 24 10:57:32 MYT 2008  Valid lock file for pid=28990, but not ours pid=30663
Sun Aug 24 10:54:43 MYT 2008  apcupsd error shutdown completed
Sun Aug 24 10:54:43 MYT 2008  Valid lock file for pid=28990, but not ours pid=30655
  please stop it and run this program again.
  If apcupsd or apctest is already running,
Unable to create UPS lock file.
Sun Aug 24 10:54:43 MYT 2008  apcupsd FATAL ERROR in device.c at line 70
Sun Aug 24 10:54:43 MYT 2008  Valid lock file for pid=28990, but not ours pid=30655
Sun Aug 24 06:56:07 MYT 2008  Power is back. UPS running on mains.
Sun Aug 24 06:56:05 MYT 2008  Power failure.
Sat Aug 23 19:37:27 MYT 2008  Power is back. UPS running on mains.
Sat Aug 23 19:37:25 MYT 2008  Power failure.
Sat Aug 23 19:35:49 MYT 2008  Power is back. UPS running on mains.
Sat Aug 23 19:35:47 MYT 2008  Power failure.
Sat Aug 23 08:58:50 MYT 2008  Power is back. UPS running on mains.
Sat Aug 23 08:58:48 MYT 2008  Power failure.
Fri Aug 22 19:32:56 MYT 2008  Power is back. UPS running on mains.
Fri Aug 22 19:32:54 MYT 2008  Power failure.
Fri Aug 22 19:25:28 MYT 2008  Power is back. UPS running on mains.
Fri Aug 22 19:25:26 MYT 2008  Power failure.
Fri Aug 22 11:55:18 MYT 2008  Power is back. UPS running on mains.
Fri Aug 22 11:55:16 MYT 2008  Power failure.
Fri Aug 22 08:44:04 MYT 2008  apcupsd error shutdown completed
and that your cable specification on the UPSCABLE directive is correct.
Please make sure the port specified on the DEVICE directive is correct,
PANIC! Cannot communicate with UPS via serial port.
Fri Aug 22 08:44:04 MYT 2008  apcupsd FATAL ERROR in smartsetup.c at line 171